Start with the two numbers that define this optic
The ZYGO F/3.3 Transmission Sphere - 4" - 1/20 Wave, PVr is specified by two values that drive most of the buying decision: an f/3.3 convergence and a 4-inch aperture, with a wavefront rating of 1/20 wave PVr. If your test setup is built around a fast, tightly converging beam and a four-inch clear aperture, this is the part to evaluate. If either number is wrong for your bench, no other detail will fix it.
This guide focuses on how to judge those constraints, what the listing confirms, and which questions to settle with ZYGO or your metrology team before ordering. It does not assume a particular interferometer model, mounting interface, or coating, because the supplied catalog record does not specify them.
Catalog identity for the F/3.3 transmission sphere
- F/3.3 Transmission Sphere - 4" - 1/20 Wave, PVr: ZYGO F/3.3 Transmission Sphere - 4" - 1/20 Wave, PVr, SKU Standard, code 6024-0399-13, listed under Accessories. Use the exact code when requesting a quote or checking against an existing setup sheet; the f/3.3 and 4-inch values are part of the product identity, not optional extras.

F/3.3 Transmission Sphere - 4" - 1/20 Wave, PVr - F/3.3 Transmission Sphere - 4" - 1/20 Wave, PVr: Specified wave rating: 1/20 wave PVr. PVr is the wavefront specification to compare against your test budget; it tells you the rated performance of this optic, not the performance of your whole system.
Why f/3.3 changes the fit decision
An f/3.3 transmission sphere produces a relatively fast converging beam. In practice, that means the optic has to match the numerical aperture and working distance your test geometry expects. A sphere with a different f-number will not simply drop into the same setup, even if the aperture diameter looks right.
The supplied record does not list the interferometer models, mounts, or adapter threads this sphere is compatible with. Treat compatibility as something to confirm from your system documentation or with ZYGO directly, rather than inferring it from the f-number alone. The 4-inch aperture is the second half of the fit check: confirm that your test setup and any handling fixtures are sized for a four-inch optic.
Reading the 1/20 wave PVr rating honestly
PVr is a peak-to-valley wavefront specification. A 1/20 wave PVr rating describes the optic's specified performance, and it is the number to compare with the wavefront budget for your measurement. It is not a guarantee about the total error of your interferometer, your alignment, or your environment.
The catalog record gives the rating but does not supply a test wavelength, measurement configuration, or certification document. If your quality process requires a certificate or a specific test condition, ask for it before purchase. Do not assume the rating was measured under the same conditions as your application.
A pre-order fit check you can run
- Confirm the convergence: Check that your setup calls for an f/3.3 transmission sphere. The f-number is part of the part identity, so a mismatch here is a hard stop, not an adjustment.
- Confirm the aperture: Verify that your test path and handling fixtures accept a 4-inch optic. The listing gives the diameter but not the outer housing or mount dimensions.
- Match the wavefront budget: Compare the 1/20 wave PVr rating with the error budget for your measurement. Decide whether that rating leaves enough margin for alignment and environment.
- Check the interface question: The supplied record does not confirm mounting threads, adapter rings, or interferometer compatibility. Resolve this with ZYGO or your system documentation before ordering.
- Confirm what ships: The listing identifies the optic and its SKU but does not describe a case, certificate, or accessories. Ask what is included if those matter to your process.
Where the listing stops, and what to ask
The supplied record confirms the brand, the f/3.3 convergence, the 4-inch aperture, the 1/20 wave PVr rating, and the SKU. It does not confirm coating, transmission, damage threshold, mounting interface, operating wavelength range, or supplied documentation. Those are not negative findings about the product; they are simply outside the evidence available here.
Before you order, ask ZYGO or your distributor specifically about: the interferometer models and adapters the sphere is intended for, the wavelength at which the 1/20 wave PVr rating is specified, whether a certificate is supplied, and what the optic ships with. Getting those answers in writing closes the gap between a catalog listing and a purchase you can defend.
How this sphere compares with other 4-inch options
The same 4-inch aperture appears in other ZYGO transmission spheres, including an F/7.1 version and an F/1.5 version. The f-number is the real differentiator: f/3.3 sits between those extremes, so the choice is about matching your test geometry rather than picking the fastest or slowest option. A sphere that is faster than your setup needs can add alignment sensitivity; one that is slower may not deliver the convergence your test requires.
If your bench already runs an f/7.1 sphere and you are considering f/3.3, treat it as a different test configuration rather than a drop-in replacement. The 4-inch aperture may be shared, but the beam geometry is not. Confirm that your interferometer and test setup are intended for the faster convergence before you commit.
Price context without overreach
The catalog lists this sphere at USD 2.41 against a comparison price of USD 3.30. That is useful context for a budget conversation, but it is not a statement about performance, condition, or included documentation. For a precision optic, the cost of getting the wrong f-number or an unconfirmed interface is far higher than the difference between those figures.
Use the price as one input, not the deciding one. The decision should rest on the convergence, the aperture, the wavefront rating, and the answers to the interface and documentation questions above.
When this transmission sphere is the right choice
Choose the ZYGO F/3.3 Transmission Sphere - 4" - 1/20 Wave, PVr when your test setup calls for an f/3.3 convergence, a 4-inch aperture, and a 1/20 wave PVr rating, and when you have confirmed the mounting and documentation details with ZYGO. That combination is specific enough that it should be matched deliberately rather than assumed.
If any of those three values is uncertain, pause and resolve it first. The catalog gives you a clear identity for the part; the rest of the decision depends on your bench, your error budget, and the answers you get from the manufacturer.


