Start with the aperture decision, not the coating
A 12-inch transmission sphere is a large-aperture optic, and that size drives nearly every other decision: which interferometer it mounts to, what test surface it can cover, and how much handling care it demands. The Dynaflect coating and the lambda/15 PVr specification are important, but they only make sense after you have confirmed the aperture is right for your setup.
This FAQ walks through what the catalog record actually states for the ZYGO 12-inch transmission sphere with Dynaflect coating, what it leaves open, and how to frame a purchase decision without guessing at missing details.
The catalog identity in one place
- 12" Transmision Sphere Dynaflect Coating: Product type: transmission sphere; size: 12 inches; coating: Dynaflect; specification: lambda/15 PVr; SKU: 6068-0453-01. These are the only verified attributes in the supplied record. Any compatibility or performance claim beyond them is not supported by the catalog.

12" Transmision Sphere Dynaflect Coating
What the listing confirms and what it does not
- Confirmed: 12-inch aperture: The size is stated directly. That is the first filter for whether this optic belongs in your interferometer setup.
- Confirmed: Dynaflect coating: The coating type is named. The catalog does not state wavelength range, reflectance values, or environmental durability, so do not infer them.
- Confirmed: lambda/15 PVr specification: This is the surface figure specification given. The catalog does not state the test wavelength or measurement conditions behind it.
- Not confirmed: interferometer model compatibility: No mount interface, thread, or interferometer model is listed. You must verify the physical fit against your own system before ordering.
- Not confirmed: installation or alignment procedure: No setup steps, torque values, or alignment instructions are supplied. Do not treat general optical practice as a manufacturer procedure for this part.
- Not confirmed: care and cleaning instructions: The record contains no cleaning or handling guidance. Ask the supplier for the manufacturer's care documentation rather than improvising.
Why the Dynaflect coating matters for a coated transmission sphere
A coated transmission sphere is chosen for its optical interface, and the coating name is the only coating evidence in this record. Dynaflect is identified as the coating, but the catalog does not list a wavelength band, transmission figure, or laser damage threshold. If your application depends on any of those, treat them as open questions to confirm with the supplier, not as assumptions you can carry into a purchase.
The lambda/15 PVr specification is the other optical anchor. It tells you the surface figure class claimed for this optic, but without a stated test wavelength or measurement configuration you should not compare it directly against a specification written under different conditions.
A pre-purchase fit check you can actually run
- 1. Confirm the aperture is what your test needs: The 12-inch size is fixed. Check that your interferometer and test setup can accept an optic of this size before going further.
- 2. Verify the mount interface against your system: The catalog does not list a mount or thread. Compare the physical interface on your interferometer with the supplier's drawing or datasheet.
- 3. Match the coating to your source: Dynaflect is the named coating, but the catalog does not state the wavelength range. Confirm the coating suits your laser or source before committing.
- 4. Ask for the missing documentation: Request the manufacturer's care, handling, and installation guidance, since the supplied record contains none.
- 5. Confirm the SKU on the quote: The SKU 6068-0453-01 is the identifier to check on any quote or order acknowledgment.
Price context without overreach
The catalog lists this transmission sphere at USD 90,768.96 with a comparison price of USD 126,068.00. That is a large-aperture optic price, and it reinforces the point of the fit check: a mismatch in mount, coating, or aperture is expensive to discover after delivery. The catalog does not explain the basis for the comparison price, so treat it as reference information rather than a claim about value.
When this transmission sphere is the right choice
- You need a 12-inch aperture: The size is the defining constraint. If your setup calls for a large-aperture transmission sphere, this is the catalog match.
- You need Dynaflect coating: If your source and application call for Dynaflect specifically, this is the named coating in the record.
- You can verify the mount and care requirements independently: Because the catalog does not supply interface or handling details, this optic suits buyers who can confirm those with the supplier or their own system documentation.
What to do before you order
The honest summary is that this listing gives you four verified facts: 12-inch size, Dynaflect coating, lambda/15 PVr specification, and SKU 6068-0453-01. Everything else that matters for a safe installation, including mount compatibility, wavelength suitability, and care instructions, has to come from the supplier or your own system documentation. Use the pre-purchase fit check above, confirm the SKU on the quote, and treat the missing details as questions to close rather than gaps to fill with assumptions.


