NX2 System Controller Upgrade: What Changes on Your Bench

By Zygo | Published: 2026-11-04

Category: Product Reviews

A practical FAQ on the NX2 system controller upgrade: what the kit includes, how it affects your Nexview bench, and what to plan before swapping controllers.

Quick answer

The NX2 system controller upgrade replaces your Nexview NX2 bench controller with a 64-bit unit that includes RAID and the latest Mx software, plus a 27-inch monitor and Windows 11 Enterprise LTSC 2024. Plan the swap around software migration and network settings rather than the hardware itself.

Why the 64-bit controller and RAID matter more than the monitor

The visible change on your bench is a new monitor, but the practical change is the controller architecture. A 64-bit controller with RAID gives your Nexview NX2 a modern compute base and disk redundancy, which matters when you are storing measurement data and running the latest Mx software.

The monitor and Windows 11 Enterprise LTSC 2024 are part of the package, so budget bench space and a clean install window rather than treating them as optional extras.

What the NX2 upgrade does not tell you

The catalog lists the controller, RAID, Mx version, monitor, and operating system, but it does not list interface cards, camera compatibility, or specific Nexview NX2 serial-number restrictions. Treat those as open questions to confirm with Zygo before you order, especially if your bench has non-standard peripherals.

If you are also planning a camera change, keep that decision separate from the controller swap so you can isolate any issues.

NX2 controller upgrade questions answered

What is actually replaced on the bench?: The controller, operating system, Mx software, and monitor are replaced as a set. Your Nexview NX2 optical hardware stays in place; the upgrade targets the compute and display side. Photograph your current cabling before you disconnect anything.
How do I plan the software move?: Because the kit includes the latest Mx version and Windows 11 Enterprise LTSC 2024, back up measurement recipes and data before the swap, then verify that your saved configurations open in the new Mx build. Confirm your backup is readable on another machine before the old controller leaves the bench.
Is my NX2 compatible?: The catalog does not state serial-number or peripheral restrictions. Ask Zygo to confirm compatibility for your specific Nexview NX2 and any attached accessories before ordering. Get compatibility confirmation in writing so the install day has no surprises.
What should I check on install day?: Verify RAID status, confirm Windows 11 Enterprise LTSC 2024 is activated, launch Mx, and run a known sample to compare against a pre-upgrade measurement. Keep the old controller powered off but intact until the first measurement matches.

Product facts

System Controller Upgrade, NX2: Includes a new 64-bit controller with RAID, the latest version of Mx, a 27-inch monitor, and Windows 11 Enterprise LTSC 2024. You get a complete compute and display refresh in one package, so plan for software migration and bench space rather than sourcing parts separately.
System Controller Upgrade, NX2