NewView 9000 5 Axis Motion Kit with 200mm Z Guide
By Zygo | Published: 2026-10-27
Category: Buying Guides
Learn when to choose the NewView 5 Axis Motion Kit with 200mm Z for your optical profiler. Compare axis configurations and find the right fit for tall or tilted samples.
Quick answer
Choose the NewView 5 Axis Motion Kit with 200mm Z if you need motorized XYZRP motion for tall, heavy, or tilted samples on a NewView 8000 or 9000 system. For standard-height samples, a 100mm Z kit may suffice.
Why Z travel matters for your profiler
The Z stage travel determines how tall a sample you can measure without manual repositioning. A 200mm Z stage accommodates larger parts or fixtures, while a shorter travel keeps the system more compact.
Motorized XYZRP motion gives you automated positioning for multi-site measurements, reducing operator fatigue and improving repeatability. The trade-off is added cost and complexity compared to manual stages or fewer axes.
Compatibility with NewView 8000 and 9000
This kit is designed for both NewView 8000 and 9000 systems, so you can upgrade or configure a new system with the same motion platform. Check that your existing controller and software support five-axis motorized motion.
If you already own a NewView 8000 or 9000 with a manual stage, retrofitting with this kit may require additional cabling or brackets — verify with Zygo support before ordering.
Decision rules for choosing your motion kit
- Sample height exceeds 150mm: Choose the 200mm Z kit. Standard 100mm Z kits cannot safely accommodate samples taller than about 80mm without risking collision.
- You need automated multi-site measurement: The motorized XYZRP motion lets you program measurement positions across a large area. If you only measure a single spot, a manual XY stage may be more cost-effective. Consider manual stage for single-site work.
- Your system is a NewView 8000 or 9000: This kit is compatible with both. If you have an older NewView model, confirm compatibility with Zygo before purchasing. Check controller and software version.
- Budget is a primary concern: The 5 Axis Motion Kit with 200mm Z is a premium option. If your samples are under 100mm tall and you don't need full automation, a 3-axis or 4-axis kit with shorter Z may save significant cost.
Product facts
- NewView 5 Axis Motion Kit with 200mm Z: Five-axis motion kit with motorized XYZRP and 200mm Z stage travel. The extra Z travel allows you to measure tall parts or use tall fixtures without manual re-staging, saving time and reducing alignment errors.
NewView 5 Axis Motion Kit with 200mm Z
Who should choose this kit
Best for
- Users measuring tall parts or assemblies over 150mm in height
- Operators needing automated XYZRP positioning for large-area or multi-site measurement routines
Not ideal for
- Users with only small, flat samples under 50mm tall — a 100mm Z kit or manual stage is more economical
- Systems that will never require motorized tilt or rotation — consider a simpler axis configuration
